Motorcycle Detailing · · 7 min read

How to Clean a Motorcycle: Step-by-Step Guide (and Winter Storage Prep)

How to clean a motorcycle safely: the right products, protecting electrics, cleaning the chain, wheels and chrome, and preparing the bike for winter storage in New Jersey.

How to Clean a Motorcycle: Step-by-Step Guide (and Winter Storage Prep)

Short answer: wash a motorcycle when the engine is cool, with a motorcycle-safe or pH-neutral shampoo, soft mitts and brushes, and low-pressure water. Cover or avoid the electrics, air intake and exhaust openings, clean the wheels and chain separately, then dry the bike thoroughly with a blower or microfiber towels before applying protection. Before winter storage, a full clean and protection matter even more, because dirt and moisture left on a bike for months cause corrosion.

Motorcycles are harder to clean than cars. There are more exposed metals, more nooks and crannies, and more parts that don't like water. A careless wash can push water into electrics, strip lubricant from the chain or scratch soft paint and plastics. Done right, though, a wash is the best way to keep a bike looking new and to spot problems early. This guide covers the steps, plus how to prepare a bike for a New Jersey winter.

What you'll need

  • A motorcycle shampoo or pH-neutral car shampoo.
  • A degreaser made for motorcycles, for the engine and lower parts.
  • Two buckets, one with soapy water and one for rinsing.
  • Soft wash mitts, and a separate mitt or brush for the wheels.
  • Soft detailing brushes for tight areas.
  • A chain cleaner, a chain brush and chain lubricant.
  • Microfiber drying towels, or a leaf blower or dedicated bike dryer.
  • Plastic bags or tape to cover sensitive openings.
  • A spray sealant, wax or quick detailer made for motorcycles.

Avoid household degreasers, dish soap and harsh wheel acids; they can stain anodized parts, dull clear coats and dry out rubber.

Step 1: Let it cool and prepare

Never wash a hot engine or exhaust. Cold water on hot metal can cause water spotting and, in extreme cases, stress parts. Park in the shade, put the bike on its center stand or a paddock stand if you have one, and cover:

  • the air intake or filter opening;
  • the exhaust outlets;
  • exposed electrical connectors and switchgear if they aren't sealed;
  • the ignition, if your bike has an open keyhole.

Step 2: Pre-rinse with low pressure

Rinse the bike from the top down with a hose on a gentle setting. Pressure washers are risky on bikes: high pressure forces water past seals into bearings, electrics and instruments. If you do use one, keep it on a wide fan, well back, and away from bearings, the chain, electrics and the instrument cluster.

Step 3: Degrease the dirty areas

Apply a motorcycle-safe degreaser to the engine cases, lower frame, swingarm and the area behind the rear wheel, where chain lube and road grime build up. Let it dwell briefly, but never let it dry, then agitate with soft brushes and rinse.

Step 4: Wash from top to bottom

Using the two-bucket method, wash the tank, fairings, seat and fenders with a soft mitt, rinsing the mitt often. Work from the cleanest parts down to the dirtiest, so you don't drag grit across painted surfaces. Matte paint needs a product made for matte finishes; don't polish or wax it, or it will become shiny.

Step 5: Wheels and brakes

Clean the wheels with a separate mitt or brush and a wheel cleaner that's safe for your finish. Avoid spraying brake discs with any product that leaves residue, including wax and quick detailer. Brake dust is corrosive, so clean it off regularly.

Step 6: Clean and lube the chain

Chain cleaning is a job for its own products:

  1. Spray chain cleaner onto the chain, protecting the tire and brake disc from overspray.
  2. Scrub with a chain brush, rotating the wheel by hand with the bike in neutral and the engine off.
  3. Wipe it clean with a rag.
  4. Once dry, apply chain lubricant to the inside of the chain, let it soak in, and wipe off any excess.

Belt and shaft-drive bikes don't need this; just clean the belt gently and inspect it.

Step 7: Dry thoroughly

Water left in crevices causes spots and corrosion. A leaf blower or a dedicated bike dryer pushes water out of the engine fins, switchgear, mirrors and wheels. Follow with soft microfiber towels. Then start the bike and let it warm up briefly to evaporate any remaining moisture, and test the brakes before riding.

Step 8: Protect

  • Paint and plastics: a spray sealant or wax made for motorcycles. A ceramic coating gives the longest-lasting protection and makes future washes faster.
  • Chrome and polished metal: a metal polish, then a protectant.
  • Unpainted plastics and rubber: a UV protectant.
  • Seat: a vinyl or leather cleaner and protectant suited to the material. Avoid slippery products on the seat.

Preparing a motorcycle for winter storage in New Jersey

Most New Jersey riders store their bikes from late fall to spring. Storing a dirty bike lets road grime, bug residue and salt sit on the finish for months.

  1. Wash and dry thoroughly, especially if you've ridden on treated roads.
  2. Clean and lube the chain.
  3. Apply protection to paint, metal and plastics.
  4. Follow your owner's manual for fuel stabilizer, battery maintenance and tire pressure.
  5. Store it covered with a breathable cover, in a dry place.

For more, see motorcycle detailing at the end of riding season.

Motorcycle detailing prices at Black Label

Package Price
Motorcycle Maintenance Detail $150
Full Motorcycle Detail $225
Paint Enhancement + Full Detail $350
Motorcycle Ceramic Protection $500

Larger touring bikes and heavily soiled bikes may cost more; you get a written estimate first. See our motorcycle detailing packages, how much motorcycle detailing costs and is motorcycle ceramic coating worth it.

Cleaning specific parts

Chrome and polished metal

Chrome looks great but shows water spots and pits if neglected, especially near the shore. After washing and drying, use a dedicated metal polish with a soft cloth, then a protectant. If chrome already has light pitting, polishing can improve it, but deep pits are permanent.

Exhaust

Clean the exhaust when it's cold. Stainless steel and chrome can be polished; heat discoloration (blueing) on headers often needs a specialist product. Never apply wax or sealant to parts that get very hot unless the product is made for it.

Windscreen

Most motorcycle windscreens are plastic, not glass, and scratch easily. Soak bugs off with a wet microfiber towel first, then clean with a plastic-safe cleaner. Never use household glass cleaner with ammonia, which can cloud plastic.

Leather and saddlebags

Clean leather seats and bags with a gentle leather cleaner, then condition them. Treat them before storage too, so they don't dry out over winter.

Plastics and fairings

Gloss plastics can scratch as easily as paint. Use soft mitts and plenty of lubrication, and a protectant on unpainted black plastics to prevent fading.

Mistakes to avoid

  • Washing a hot bike.
  • Pressure washing bearings, electrics or the chain.
  • Using the same mitt on wheels and paint.
  • Leaving it to air-dry, which leaves water spots and corrosion.
  • Getting wax or detailer on brake discs or tires.
  • Riding straight after a wash without testing the brakes.

How long does a motorcycle wash take?

A quick wash and dry takes about an hour. A thorough clean with chain care, polishing and protection can take half a day.

Frequently asked questions

Can I take my motorcycle through a car wash?

It's not a good idea. High-pressure jets and brushes can damage electrics, mirrors and finishes. Hand washing is much safer.

How often should I wash my motorcycle?

Every couple of weeks during riding season, and after rain or riding on treated roads. Clean bugs off promptly, as they can etch paint.

Is WD-40 good for cleaning a motorcycle?

It's useful for displacing water from some metal parts, but keep it off brakes, tires and paint, and use a proper chain lube on the chain.

Can you detail my motorcycle at home?

Yes. We detail motorcycles at your home across Ocean and Monmouth County, or at our Toms River shop.

Does a ceramic coating work on matte paint?

Yes, if it's a coating made for matte finishes. It protects without adding gloss.

Book a motorcycle detail

Whether it's getting ready for storage or back on the road in spring, we'll make your bike look its best. Black Label details motorcycles at our Toms River shop, at 451 NJ-37 inside Extreme Kleen on Route 37 East, and at your home across Ocean and Monmouth County, including Toms River, Brick, Howell and Wall Township.

Book your motorcycle detail or call 973-563-1004.

Keep reading

Related articles

All articles

Toms River shop · Mobile across Ocean & Monmouth

Ready for a professional detail?

Tell us about your vehicle and we will confirm everything in writing before we arrive.

  • Shop or mobile, your choice
  • Written estimate first
  • Insured & appointment-only

Visit our shop

451 NJ-37
Toms River, NJ 08753

Inside Extreme Kleen on Route 37 East · Mon–Sat 7am–6pm by appointment

Book Now
Call